designed & dimensioned in millimeters [inches] do not scale from this print semx-1xx-xx-xx.x-xx-d-xx-xx -05 thru -50 (per row) (in 5 pos increments) row specification -d: double row lead style -02: surface mount plating specification -h: heavy, .000030 gold on contact, gold flash on tail -g: gold, .000010 gold on contact gold flash on tail -fg: flash, .000003 on entire contact option -tr: tape & reel -k: polyimide film (use k-500-300, see fig. 5, sht 2) option -a: alignment pin (see fig. 2, sheet 2) (not available with -lc or -wt) (not available on seml or sems) -lc: locking clip (see fig. 3, sheet 2) (not available with -a or -wt) (not available on seml or sems) -wt: weld tab (see fig. 4, sheet 2) (not available with -a or -lc) ( standard on seml) (not available on sems) -03.0: 3 mm stack height body option * * = not released no of positions (leave blank if option not used, use sem) l: friction lock (use seml, see fig. 6, sheet 3) s: slim (use *sems, see fig. 7, sheet 3) (not available with -a, -lc, or -wt) (only available with -tr) 3.20 .126 ref 0.80 ref .031 ((no of pos - 1) x 0.800) .0315 (tol non accum) (not symmetrical) 0.13 .005 01 (no of pos x .800 [.0315) + 1.000 .0394 (no of pos x 0.800) [.0315] + 4.500 .1772 ref 4.50 .177 ref 0.09 ref .004 3.30 .130 ref "a" "a" c 02 first position indicator 0.10 3.75 .148 3.359 .132 section "a"-"a" sem-xx-03.0 c-241-03.0-x c c c fig. 1 sem-110-02-03.0-xx-d shown sheet of unless otherwise specified, dimensions are in millimeters. tolerances are: decimals angles x.x: 0.3 [.01] 2 x.xx: 0.13 [.005] x.xxx: 0.051 [.0020] material: .8mm tiger eye micro socket by: semx-1xx-xx-xx.x-xx-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b ray 10-19-2007 3 1 sheet scale: 7:1 insulator: vectra e130i contact: #25 becu, half hard locking clip: phos bronze 510 weld tab: brass allow 260, full hard f:\dwg\misc\mktg\semx-1xx-xx-xx.x-xx-d-xx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pushout force for contact, locking clip and weld tab: 2.22n. 3. height variation between any two contacts: 0.13 maximum. 4. parts to be packaged in trays unless otherwise specified. 5. positions -05 thru -20 will have only one friction lock. positions -25 thru -40 will have two friction locks. positions -45 thru -50 will have three friction locks. 6. note deleted. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision d
1.00 ref .039 (no of pos x .800) [.0315] + 2.000 .0787 fig. 2 sem-110-02-03.0-xx-d-a shown sem-xx-03.0-a c 0.25 .010 1.27 .050 + 3.000 [.1181] (no of pos x .800) [.0315] 2 max sway (typ) fig. 3 sem-110-02-03.0-xx-d-lc shown sem-xx-03.0-lc lc-06-tm wt-36-01-t c c + 3.000 [.1181] (no of pos x .800) [.0315] 0.30 .012 ref 2 max sway (typ) "b" "b" fig. 4 sem-110-02-03.0-xx-d-wt shown c c 1.15 ref .045 0.75 ref .030 0.90 ref .035 "s" "r" 0.15 .006 3.51 .138 "c" "c" note: "r" = overall length (ref) "s" = {("r" - 3.51[.138])/2 [.0787]} 0.51 [.02] fig. 5 sem-110-02-03.0-xx-d-k shown 1.89 .075 0.50 .020 ref section "b"-"b" sem-xx-03.0 3.49 .137 section "c"-"c" sheet of .8mm tiger eye micro socket by: semx-1xx-xx-xx.x-xx-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b ray 10-19-2007 3 2 sheet scale: 5:1 revision d f:\dwg\misc\mktg\semx-1xx-xx-xx.x-xx-d-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
0.15 .006 "r" "s" 3.51 .138 "d" "d" fig. 6 seml-110-02-03.0-xx-d-wt-k shown note: "r" = overall length (ref) "s" = {("r" - 3.51[.138])/2 [.0787]} 0.51 [.02] seml-xx-03.0 3.50 .138 section "d"-"d" see note 5 wt-36-01-x c-241-03.0-x "s" "r" 3.51 .138 fig. 7 sems-110-02-03.0-xx-d-k shown sems-xx-03.0 c-241-03.0-x note: "r" = ((no. of pos x 0.800) + 1.600) 0.05 "s" = {("r" - 3.51[.138])/2 [.0787]} 0.51 [.02] 3.49 .137 sheet of .8mm tiger eye micro socket by: semx-1xx-xx-xx.x-xx-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b ray 10-19-2007 3 3 sheet scale: 7:1 revision d f:\dwg\misc\mktg\semx-1xx-xx-xx.x-xx-d-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
